Description: The Outdoor Unit (ODU) is part of the digital microwave transmission system. It supports a point-to-point digital fixed radio service and works together with the Indoor Unit (IDU) to provide multiple types of service interfaces.
What does it stand for in telecom?
Government, Politics, Technology. 2. ITS. Internet Telephony Services. Technology, Telecommunications Equipment.
What does SCP stand for in telecom?
A service control point (SCP) is a standard component of the Intelligent Network (IN) telephone system which is used to control the service. Standard SCPs in the telecom industry today are deployed using SS7, SIGTRAN or SIP technologies.
What does RTD stand for in telecom?
In telecommunications, round-trip delay (RTD) or round-trip time (RTT) is the amount of time it takes for a signal to be sent plus the amount of time it takes for acknowledgement of that signal having been received.
What does ETL stand for in telecommunications?
ETL
| Acronym | Definition |
|---|---|
| ETL | Enterprise of Telecommunications Lao (Laos) |
| ETL | Engineering Technical Letter |
| ETL | Echo Train Length (imaging) |
| ETL | Electrical Transmission Line |
What is MACD telecom?
MACD orders in telecom describe any order for a move, an add, a change, or a disconnection of services. Often referred to as provisioning activity, MACDs are a vital component of telecom expense management (TEM) and a key facet of telecom inventory management.
What is SLC in telecom?
A subscriber loop carrier or subscriber line carrier (SLC) provides telephone exchange-like telephone interface functionality.
What is control point in network?
Control points provide function for the APPN network similar to the function the SSCP provides for the subarea network. The CP can implement end node or network node functions. The CP: Activates and deactivates network resources. Assists in session initiation and termination.
What are the service control points in signaling system SS7?
There are three kinds of signaling points in the SS7 network (see Figure 6): SSP (Service Switching Point or Signal Switching Point) STP (Signal Transfer Point) SCP (Service Control Point)
What does RTT stand for in medical terms?
Referral To Treatment (medicine) RTT.
What is the difference between ETL and ELT?
ETL transforms data on a separate processing server, while ELT transforms data within the data warehouse itself. ETL does not transfer raw data into the data warehouse, while ELT sends raw data directly to the data warehouse.
What is the acronym for NEMA?
The National Electrical Manufacturers Association (NEMA) is the largest trade association of electrical equipment manufacturers in the United States.
What does ETL certified mean?
Electrical Testing Laboratories
ETL stands for Electrical Testing Laboratories, the certification division of Intertek Testing Laboratories, who are also part of the NRTL program and provide assurance, testing, inspection and certification services for a huge range of industries.
What is MACD in ITIL?
MACD stands for an order to Move, Add, Change, or Delete a service.
Is MACD a lagging indicator?
MACD is a lagging indicator. After all, all of the data used in MACD is based on the historical price action of the stock. Since it is based on historical data, it must necessarily “lag” the price. However, some traders use MACD histograms to predict when a change in trend will occur.
What is a MACD request?
What Are MACD Requests? MACD is an abbreviation where every letter represents an action that your organization’s IT department performs: move, add, change and disconnect.
What is a SLC 96?
Abstract: The SLC∗-96 system is a digital subscriber carrier system that can carry up to 96 subscriber channels, when fully equipped, between a Central Office Terminal (COT) and a Remote Terminal (RT), using T1 digital lines.
What is meant by subscriber loop?
Subscriber Loop Systems
In a general telephone network, every subscriber has two dedicated lines connecting to the nearest switching exchange, which are called the Loop lines of that subscriber. The laying of lines to the subscriber premises from the exchange office is called Cabling.
What is subscriber loop design?
Last Updated on Thu, 03 Mar 2022. The cables that connect the telephone handsets or other devices to the local switching office or end office is referred as subscriber loop or local loop. Every suscriber has his own pair of wires to the local switching office.
Is SS7 used in LTE?
While SS7 was the foundation for signaling in 2G/3G circuit switch networks, Diameter has been introduced for 4G LTE and VoLTE packet networks and IP Multimedia Subsystem (IMS) based systems, and is key to enabling new revenue-generating IP services.
How do I connect to SS7 network?
An ss7 connection can be set up on special hardware [TDM Links (E1/T1)] or on over IP[ Sigtran]. If messaging has to be on TDM, then the messaging server or SMSC should be placed at the operator’s premises. This is generally discouraged because it requires extra space and resources in the operator data center.
